Although the water dispenser has brought us great convenience, we should also know that the water dispenser is an electrical appliance or an equipment, as long as it is an electrical appliance or equipment, it will be broken one day. For the water dispenser, the most common problem is water leakage, so how to do with water dispenser leakage, what are the causes of water dispenser leakage, and what are the common failures of water dispenser in one year? Let's introduce it for you.

How to deal with the leakage of water dispenser

How to deal with water dispenser leakage

1. Water dispenser leakage may be the tap water leakage, if so, tighten the loose cover, open to clean impurities, if necessary, replace the faucet can solve the problem of water dispenser leakage.

2. In view of the water dispenser smart seat leakage, if it is caused by the water bottle rupture overflow, so long to replace the intact water bottle, if the use of clean water bucket floating ball failure can not effectively seal, you need to replace the floating ball.

3. It is also possible that the internal components of the water dispenser leak, such as silicone tube rupture, hot tank, cold tank weld water leakage, electronic ice bladder leakage, solenoid valve leakage, water bottle rupture caused by internal overflow, etc., can be solved by replacing damaged parts and using good and qualified water bottles.

4. If bottled water is used at home, it is estimated that the water dispenser is leaking due to the leaking of the bucket. The air leakage point is between the mouth of the bucket and the cap. Since all the bottled water is filled repeatedly, there will be a certain degree of wear and tear on the barrel mouth during the filling process, which will affect the sealing degree between the cap and the mouth. Therefore, it is recommended that you replace a bucket of water.

Causes of water leakage in drinking water dispenser

Trachoma in bladder

Reason: the water dispenser has been used for a long time, and the inner liner has been corroded, resulting in water leakage. The cause of tank corrosion is that the alkalinity of water is relatively large, which may cause trachoma in the tank due to corrosion of the heating tank during heating, resulting in water leakage after cleaning.

Rubber tube aging

Reason: the connection between the heating pipe and the rubber pipe of the drinking water dispenser is due to the aging of the rubber pipe due to the long-term heating condition. Therefore, there may be water leakage after cleaning the water dispenser.

Drinking water cover problem

Reason: there is an outer cover of the water dispenser where the water dispenser is in contact with the bottled water. If the water dispenser is placed unevenly or damaged, it will directly lead to water leakage.

Common faults and troubleshooting of drinking machine

1. Water dispenser leaking or not

The common fault of water machine is water leakage or no water flow, and the water leakage elimination is relatively simple. If there is no water coming out of the water machine, we should first find out which filter element is blocked. The way to find out is to disassemble the water inlet of each filter element one by one to find out which filter element is blocked. If you find the blocked filter element, you can screw off the connector, shake it or directly connect the tap water for back flushing to see if there is any foreign matter blocking at the joint. If it is not re installed, if it can not be solved Just replace the filter element.

2. No heating or cooling

The failure of the direct drinking machine is usually not heating or cooling. If it is not heating, we should first check whether the power switch at the back of the machine is turned on. If it is turned on and not heated, turn on the back plate of the machine to check whether the wire is loose. If it is loose, it is OK to connect it again.

3. Thermostat replacement

The replacement of the temperature controller is very simple. Open the back cover of the water dispenser, loosen the screw, and replace the temperature controller. Pay attention that the temperature controller must be close to the wall of the hot water tank, and then replace the screw.

Ningbo Ninfun Electrical Appliances Co.,Ltd
air fryer,water dispenser,air cooler,water cooler